Cable clip
Screw-down strain-relief clip for cable, conduit or hose.
Loading viewer…
Dimensions
35 mm
18 mm
3 mm
2
3.2 mm
No account, no credit. Want it in 3MF or STEP, or a shape that isn't here? Describe it instead.
What you can change
- Length
- 15–120 mm · default 35 mm
- Width
- 8–60 mm · default 18 mm
- Base thickness
- 1.5–10 mm · default 3 mm
- Screw holes
- 1–6 · default 2
- Hole diameter
- 2–10 mm · default 3.2 mm
This part is generated from a hand-written, print-tested OpenSCAD module — the same numbers always produce the same geometry. It is not an AI guess, and it does not cost a credit. Before a load-bearing or fit-critical print, check it against our design guide for wall thickness, overhangs and orientation.
Print notes for this part
- The latch tab is a small flexing feature — print in PETG or PLA+ if it will be opened and closed repeatedly. Standard PLA tends to fatigue-crack at the tab root after dozens of cycles.
- hole_d 3.2 mm is sized for an M3 screw's shank, the usual choice for this size of clip; go to 4.2 mm for M4.
- No supports needed — the tab and tooth are both printed flat against the bed, angled up rather than overhanging.
More guides
Free Parametric TemplatesProven starters — brackets, knobs, gears, boxes. Set the dimensions and download the STL, no account.AI STL GeneratorDescribe a part in plain words and get a validated, printable STL/3MF/STEP file.Photo to 3D Print FileTurn a photo — a portrait for a lithophane, or a broken part — into a printable file.Replace a Broken PartPhotograph a snapped bracket, clip, or gear and get a printable replacement.Image to 3D PrintSkip the Inkscape-to-CAD vector pipeline — turn a JPG or PNG into a printable file directly.AI Bracket & Mount GeneratorDescribe a custom bracket, mount, or enclosure and get a file that fits.3D Printing Without CADFor makers who already print and slice, but don't want to learn CAD for one-off parts.Fix Non-Manifold EdgesWhat non-manifold geometry is, how to repair it in Blender, and how to skip the repair step.Design for 3D Printing (DfAM)Watertight is not enough — wall thickness, overhangs, fits, and orientation for AI-generated STLs.AI Miniature GeneratorDescribe a D&D or tabletop figure and get a printable STL — no ZBrush or Blender.What Is an STL File?What STL stores, why printers use it, how it differs from OBJ/STEP, and how Formo builds one from text.Free AI 3D Generators ComparedHands-on July 2026 look at which free AI 3D tools actually let you download a printable file.