Wall hook
Single bent hook with an adjustable rise and angle — mount a few in a row for a custom rack.
Loading viewer…
Dimensions
6 mm
18 mm
12 mm
45°
No account, no credit. Want it in 3MF or STEP, or a shape that isn't here? Describe it instead.
What you can change
- Rod diameter
- 3–20 mm · default 6 mm
- Arm length
- 8–80 mm · default 18 mm
- Tip rise
- 4–60 mm · default 12 mm
- Arm angle
- 0–90° · default 45°
This part is generated from a hand-written, print-tested OpenSCAD module — the same numbers always produce the same geometry. It is not an AI guess, and it does not cost a credit. Before a load-bearing or fit-critical print, check it against our design guide for wall thickness, overhangs and orientation.
Print notes for this part
- This is one hook with no mounting plate or holes — glue it into a recess, embed it in another print, or pair it with the L-bracket template if you need a screw-down mounting flange.
- Built from rounded capsule segments, so it prints without supports at any angle from 0-90° — there is no sharp internal corner for the printer to struggle with.
- A row of these spaced along the hook-rail template's hole spacing gives you a matching multi-hook rack from two separate prints, cheaper than reprinting the rail with more hooks.
More guides
Free Parametric TemplatesProven starters — brackets, knobs, gears, boxes. Set the dimensions and download the STL, no account.AI STL GeneratorDescribe a part in plain words and get a validated, printable STL/3MF/STEP file.Photo to 3D Print FileTurn a photo — a portrait for a lithophane, or a broken part — into a printable file.Replace a Broken PartPhotograph a snapped bracket, clip, or gear and get a printable replacement.Image to 3D PrintSkip the Inkscape-to-CAD vector pipeline — turn a JPG or PNG into a printable file directly.AI Bracket & Mount GeneratorDescribe a custom bracket, mount, or enclosure and get a file that fits.3D Printing Without CADFor makers who already print and slice, but don't want to learn CAD for one-off parts.Fix Non-Manifold EdgesWhat non-manifold geometry is, how to repair it in Blender, and how to skip the repair step.Design for 3D Printing (DfAM)Watertight is not enough — wall thickness, overhangs, fits, and orientation for AI-generated STLs.AI Miniature GeneratorDescribe a D&D or tabletop figure and get a printable STL — no ZBrush or Blender.What Is an STL File?What STL stores, why printers use it, how it differs from OBJ/STEP, and how Formo builds one from text.Free AI 3D Generators ComparedHands-on July 2026 look at which free AI 3D tools actually let you download a printable file.